Table of Contents
Advertisement
Chapter 1
1.3 CPU Installation
1.3.1 CPU Installation Procedure: Socket 478
1.
Pull the lever sideways away from the socket then raise the lever up to a
90-degree angle.
2.
Locate Pin A in the socket and look for the white dot or cut edge in the CPU.
Match Pin A with the white dot/cut edge then insert the CPU.
3.
Press the lever down.
4.
Put the fan on the CPU by buckling it and then put the fan's power port into
the JCFAN1, then the installation will be completed.
Motherboard Description
1-10
Advertisement
Table of Contents
