Table of Contents
Advertisement
Chapter 2
Power Button Override
When you select Enabled, pressing the power button for more than 4 seconds forces
the system to enter the Soft-Off state when the system has "hung."
The Choices: Instant Off (default), Delay 4 Sec.
PM Wake Up Events
If you highlight the literal "Press Enter" next to the "PM Wake Up Events" label
and then press the enter key, it will take you a submenu with the following options:
IRQ [3-7, 9-15], NMI
This item allows you enable/disable IRQ [3-7,9-15] NMI.
The Choices: Enabled (default), Disabled.
IRQ 8 Break Suspend
This item allows you enable/disable IRQ8 Break Suspend.
The Choices: Disabled (default), Enabled.
RING Power Up Control
This item allows you to control the RING Power Up.
The Choices: Enabled (default), Disabled.
MACPME Power Up Control
This item allows you to control the MACPME Power Up.
The Choices: Enabled (default), Disabled.
PCIPME Power Up Control
This item allows you to control the PCIPME Power Up.
The Choices: Enabled (default), Disabled.
Power Up by Alarm
When you select Enabled, fields appear that let you set the alarm that
returns the system to Full On state.
The Choices: Disabled (default), Enabled.
Month Alarm
Select a month (1-12) or NA if you want the alarm active during all
months
Day of Month Alarm
Select a date in the month. Select 0 if you prefer to set a weekly alarm.
Time (hh:mm:ss) Alarm
Set the time you want the alarm to go off on the days when it is activated.
2-23
BIOS Setup
Advertisement
Table of Contents
