Table of Contents
Advertisement
Chapter 2
Use IR Pins
Consult your IR peripheral documentation to select the correct setting of
the TxD and RxD signals.
The Choices: IR-Rx2Tx2 (default), RxD2, TxD2.
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller
with which I/O Address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
The default value is SPP.
SPP(default)
EPP
ECP
ECP+EPP
EPP Mode Select
Select EPP port type 1.7 or 1.9.
The Choices: EPP 1.7(default), EPP1.9.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
Game Port Address
Game Port I/O Address.
The Choices: 201 (default), 209, Disabled.
Midi Port Address
Midi Port Base I/O Address.
The Choices: 330 (default),300, 290, Disabled.
Midi Port IRQ
This determines the IRQ in which the Midi Port can use.
The Choices: 5, 10 (default).
Using Parallel port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel
Port.
Using Parallel port as Extended Capabilities
Port.
Using Parallel port as ECP & EPP mode.
2-18
BIOS Setup
Advertisement
Table of Contents
