Table of Contents
Advertisement
Chapter 1
Motherboard Description
SDRAM:
1. The SDRAM DIMM socket has a
" Plastic Safety Tab", and the SDRAM
DIMM
memory
module
has
an
Asymmetrical notch", so the SDRAM
DIMM memory module can only fit into
the slot in one direction.
2. Push the tabs out. Insert the SDRAM
DIMM memory modules into the socket
at a 90-degree angle, then push down
vertically so that it will fit into the place.
3. The Mounting Holes and plastic tabs
should fit over the edge and hold the
SDRAM DIMM memory modules in place.
1-14
Advertisement
Table of Contents
