Name And Function Of Each Part - Toshiba TCB-SS1UU-E Owner's Manual

Link
Table of Contents

Advertisement

Link Adapter

4-3. Name and function of each part

70
40
No.
1
Indicator LED
2
SW1: SD write operation switch
3
Indicator LED
4
Power LED (green)
5
Indicator LED
6
Operation switch
7
Case fastening screws
8
Power cable port
9
Uv line communication connector
10
USB type-C connector (USB 2.0)
11
USB type-C connector (USB-COM)
12
UART communication connector
13
Fixing magnets
-EN
7
5
6
1
2
12
11
10
Name
UART
(green)
Uv
(orange)
SD
(red)
ACCESS
207
3 4
Indicates the status of the UART communication. This LED blinks when
the unit receives a signal from the air conditioner via the air conditioner
connection cable. At other times, it is off.
Indicates the communication status of the Uv line. This LED blinks when
the unit receives a signal from the air conditioner via the Uv line
connection cable. At other times, it is off.
Indicates the status of access to the microSDHC™ card inserted in this
unit. This LED is off when logging is stopped. It blinks at 0.5-second
intervals when logging is in progress or at 0.2-second intervals when an
error occurs.
Used to perform the operation of starting and stopping data writing to the
microSDHC™ card inserted in this unit.
- (Not used in this product.)
Turns on when power is supplied.
- (Not used in this product.)
- (Not used in this product.)
* Pressing this switch causes the indicator LED of 5 to blink. It does not
affect the operation of the product.
Used to fasten the upper and lower cases. (A screw anti-drop
mechanism is provided.)
A port through which to insert the accompanying power cable.
Used to connect the accompanying Uv line communication cable, which
is in turn connected to the indoor/outdoor communication terminal of the
air conditioner.
Connected to the PC to access the microSDHC™ card inserted in this
unit.
Connected to the PC to read communication data from the Uv or UART
line.
Used to connect the accompanying air conditioner communication
cable, which is in turn connected to the UART connector of the air
conditioner.
Used to install the unit to an air conditioner.
Owner's Manual
9
Function
(Unit: mm)
7
8
13

Advertisement

Table of Contents
loading

Table of Contents