Table of Contents
Advertisement
Link Adapter
6-5. Saving UART communication or Uv line
communication data in the microSDHC™ card
By operating the SW1 button (Refer to page 6.), you can have this unit record the Uv line or UART communication data
received from the air conditioner in its microSDHC™ card. The air conditioner-side communication destinations
corresponding to this function and their baud rates are as follows.
Air conditioner-side
communication destination
UART
Uv line
* The baud rate does not need to be set.
The standard number of days for logging is approx. 2 month in the case of an 16-GB microSDHC™ card.
Logging stops when the card runs out of free space.
It is recommended to copy necessary recorded data to the PC before deleting data from the microSDHC™ card.
6-6. Working with files in the microSDHC™ card
Using a PC running on the supported operating system shown below, you can format the system of the microSDHC™ card
inserted in this unit and read and write recorded data to and from the card.
Windows 10
If you connect this unit to the PC via the USB 2.0 connector, this function recognizes the unit as a USB drive.
Using Explorer or some other tool, you can directly access the data in the microSDHC™ card of this unit.
For system formatting, specify FAT32 as the file system.
The recorded data is not deleted. To delete the recorded data, use Explorer.
Speed (baud) [bps]
38,400/115,200
9,600/19,200
Owner's Manual
-EN
16
Advertisement
Table of Contents
