Table of Contents
Advertisement
Symptoms
dE1 dEz
Drawer ERROR
dO
DOOR ERROR
tE
CONTROL ERROR
LE
MOTOR LOCKED ERROR
FE
OVERFLOW ERROR
PE
PRESSURE SENSOR
ERROR
E7
STACKING ERROR
FF
FROZEN FAILURE
tcL
TUB CLEAN ALARM
[L
CHILD LOCK FUNCTION
Drawer is not closed properly.
• Close the drawer and press Start/Pause button to start the cycle.
• This error message is displayed though the drawer is closed, call for
service.
Door is not closed properly.
• Open the drawer and make sure the latch area is free of clothing or other
obstructions.
• Close the door, shut the drawer, and press Start/Pause to start the cycle.
• This error message is displayed though the drawer is closed, call for
service.
This is a control error.
• Unplug the power plug and call for service.
Over load in motor.
• Let the appliance wait for 30 minutes until the motor is cooled down and
then, restart the cycle.
Water overfills due to a possible faulty water valve.
• Close the water tap. Unplug the power plug. Call for service.
Water level sensor malfunctions.
• Close the water tap. Unplug the power plug. Call for service.
You may operate the Mini Washer without stacking a full-size washing
machine.
• Mini Washer will not operate as a standalone unit. It must be stacked
under a suitable LG front-loading washing machine.
Stacking switch is not working properly.
• The product is for use only in combination with LG authorized appliances.
Call the customer information centre to check out LG authorized
appliances.
Is supply/drain hose or drain pump frozen?
• Supply warm water into the drum in order to unfreeze the drain hose and
the drain pump. Cover the supply hose with wet and warm towel.
The programme has run more than 30 times.
• Run the Tub Clean function.
is not an error. This prevents children from changing cycles or
[L
operating the appliance.
• Turn off the Child Lock function in the control panel.
TROUBLESHOOTING
Possible Cause & Solution
35
Advertisement
Table of Contents
