Advertisement
Figure 4
1. Door handle
2. Large spacer
3. Adhered mirror mount
4. Washer
6.
Install the latch assembly to the handle mount
using the hardware that you removed in step 1;
refer to
Figure
1.
7.
Install the mirror arm to the top holes of the
mirror mount using 2 flange-head screws (6 x 16
mm) as shown in
Figure 5
1. Mirror arm
2. Flange-head screws (6 x
16 mm)
5. Mounting nut
6. Flange-head bolt (6 x 25
mm)
7. Small spacer
Figure
5.
3. Mirror mount
8.
Slide the mirror onto the mirror arm, and adjust
the mirror to your desired angle
g189935
1. Mirror arm
9.
Tighten the screws on the back of the mirror to
secure the mirror to the mirror arm
1. Screws
10.
Repeat this procedure on the other side of the
machine.
g189936
3
(Figure
Figure 6
2. Mirror
(Figure
Figure 7
6).
g189937
7).
g189938
Advertisement
