Toro 136-1997 Installation Instructions page 2

2
Installing the Mirror Mounts
Parts needed for this procedure:
1 Left mirror mount
1 Right mirror mount
1 Left handle gasket
1 Right handle gasket
2 Side mirror arm assembly
2 Rearview mirror arm assembly
4 Flange-head screw (6 x 16 mm)
Procedure
1. Remove the bolts, support plate, and nuts that
secure the latch assembly to the handle mount
(Figure 1).
1. Bolt
2. Support plate
2. Remove the latch assembly from the handle
mount.
3. Remove the mounting nut, washer, flange-head
screw (6 x 25 mm), 2 spacers, and 2 grommets
from the door handle, and remove the door
handle (Figure 2).
Note:
Retain the door handle, mounting nut,
washer, 2 spacers, and flange-head screw (6
x 25 mm).
Figure 1
3. Nut
4. Latch assembly
Note:
Discard the large and small grommets.
1. Door handle
2. Large grommet
3. Large spacer
4. Washer
4. Adhere the handle gasket to the mirror mount
(Figure 3).
g272301
1. Mirror mount
5. Install the door handle using the adhered mirror
mount and the previously removed mounting
nut, washer, flange-head bolt (6 x 25 mm), and
2 spacers
2
Figure 2
5. Mounting nut
6. Flange-head screw (6 x 25
mm)
7. Small spacer
8. Small grommet
Figure 3
2. Handle gasket
(Figure 4).
g189865
g189934