Set Date/Time - termovana ANNA General Information Manual

9.2 PROGRAMMING
User programming is possible through the menu,
which can be opened by pressing the SET key on
the illuminated display panel. To exit the menu at
any time without making any changes, press the
STOP key. In any case, if the keys are not pressed
for about 1 minute, the system will automatically
exit the menu to show the stove status. To scroll
the various menus use the TEMP+ and TEMP-
keys, to open the displayed menu, press SET.
9.3 DATE AND TIME
SET DATE-TIME
Press SET to open the incorporated calender
setting menu. The day of the week can be
changed from Monday to Sunday, as well as the
time and date. To switch between the variables,
use the PROG+ and PROG- keys, and to change
the values, use the TEMP+ and TEMP- keys. To
confirm the changes and exit, press the SET key.
9.4 WEEKLY
WEEKLY PROG
We 19 : 04
14/04/11
The programmer is only active in the automatic
operating mode (AUTO on the display).
There are 15 settable programming levels for
on and off times, the temperature and operating
programme. Each single programme can be
disabled without needing to be cancelled, following
a very simple procedure.
Press SET to open and scroll the various
programmes, or the TEMP+ and TEMP- keys to
scroll the variables to be changed. Then use the
PROG+ and PROG- keys to set the requested
values .
18
9.5 PROGRAMME NUMBER
F01 MF 08 : 00 20
P4
Indicates the selected programme, from 1 to 15.
9.6 DAY OF THE WEEK
Indicates the day of the week of the displayed
programme. A setting can be made for each day,
from Monday to Sunday (Mo,Tu,We,Th,Fr,Sa,Su)
or else for all work days from Monday to Friday
(MF), or else for weekends from Saturday to
Sunday (SS). This system allows the setting of a
single programme to turn the stove on or off every
day, from Monday to Friday, at the same time.
9.7 HOUR
Stove on or off hour.
9.8 MINUTES
Stove on or off minutes.
9.9 TEMPERATURE
For ignition programmes, the requested ambient
temperature must be set between 5 and 30°C.
9.10 REQUESTED PROGRAMME
For ignition programmes, the requested heating
programme must be set between 1 and 5.
9.11 PROGRAMME TYPE
Set either an ignition programme, ON, or power off
programme, OFF.
9.12 PROGRAMME ENABLING
This function is essential, because if in the disabled
position (No A.) the system will not control the
programme and the programme function may not
be executed.
9.13 EXAMPLE OF PROGRAMMING
To programme the stove so that it turns on every
day from Monday to Friday at 8am at level 4, with
a temperature of 20°C, proceed as follows after
opening the ignition programme setting.
With TEMP+ select MF as the ignition days from
Monday to Friday.
Select the Hour using the PROG+ key and set 08
with the TEMP+ and TEMP- keys.
Select the minutes using the PROG+ key and set
00 with the TEMP+ and TEMP- keys.
Select the temperature using the PROG+ key and
set 20° with the TEMP+ and TEMP- keys.
Select the heating power using the PROG+ key
and set 4 with the TEMP+ and TEMP- keys.
02/2021 - EN
o
On Enab.