Parameter
CGI Enable
Onvif Enable
Password Reset
Authentication
Mode
Click Save.
3.4.6 Onvif User
The function is mainly for acquiring streams through Onvif protocol, and the information of the
Onvif user needs to be validated. You can add or delete Onvif users, and modify their
passwords. The Onvif user is admin by default.
Preparation
On the web interface, select Local Setting > Security, and then select the Onvif Enable
check box.
Procedure
Select Local Setting > Onvif User on the web interface.
Click Add.
Enter the username and password, and then confirm the password you entered.
Security management
Table 3-4 Security management parameter description
Description
Enabled by default. The Terminal can connect with other network
video products through this protocol.
CGI (Common Gateway Interface) is an interface between external
programs and web server.
Enabled by default to allow password resetting and setting reserved
email address. After successful setting, you can reset the password
by clicking Forgot password? on the login interface.
If the function is disabled, you can only reset the password after
restoring the Terminal to factory settings by pressing the reset button
on the device.
Select the anthentication mode from Security Mode and Compatible
Mode.
16
Need help?
Do you have a question about the VTA2302A and is the answer not in the manual?