Biostar K8M800 Micro AM2 Bios Setup Manual page 18

K8M800 Micro AM2 BIOS Setup
AGP & P2P Bridge Control
If you highlight the literal "Press Enter" next to the "AGP & P2P Bridge Control" label and then
press the enter key, it will take you a submenu with the following options:
Figure 4.1: AGP & P2P Bridge Control
AGP Aperture Size
Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is
of the PCI memory address range dedicated for graphics memory address space. Host
cycles that hit the aperture range are forwarded to the AGP without any translation.
The Choices: 1G,512M,256M, 128M (default), 64M ,32M.
AGP 2.0 Mode
This item allows you to select the AGP Mode.
The Choices: 4X (default), 2X, 1X.
AGP Driving Control
By choosing "Auto" the system BIOS will the AGP output Buffer Drive strength P Ctrl by
AGP Card. By choosing "Manual", it allows user to set AGP output Buffer Drive strength P
Ctrl by manual.
The Choices: Auto (default), Manual.
17
a
portion