2118 (RH-77)
RF Description and Troubleshooting
Figure 31
shows the layout for the Rx VHF.
Figure 31: (Top) PWB. (Bottom left) A zoomed view of the testing points on the Rx VHF section.
(Bottom right) A zoomed view of the Rx VHF section with part numbers.
Tx VHF
Following are possible causes for an incorrect Tx VHF frequency:
• Power supplies to the PLL portion of N601IC missing or low (VR5)
• Loop filter or resonator components are missing or incorrectly installed
• 19.2MHz reference clock is missing or low (C510)
• Programming is incorrect
• Component failure (N601 IC)
Note: See the Schematics chapter for the Tx VHF schematic.
Page 40
©2005 Nokia Corporation
Nokia Customer Care
Company Confidential
IC with
Issue 01 04/2005