2118 (RH-77)
RF Description and Troubleshooting
Switching the Gain
Use the following steps if the receiver is not working properly and you need to switch the
Rx gain state.
1. Open the Phone Control dialog box.
Figure 15: Phone Control dialog box for switching the Rx gain state
2. Click the LOCAL button in the Phone State area to put the mobile terminal into
Local Mode.
3. Select the following values on the RF Main Mode dialog box:
Band = Cell (CDMA)
•
Channel = 384
•
Mode = Rx
•
Figure 16: RF Main Mode dialog box for switching the Rx gain state
4. Click Set.
Note: Be sure that the "RF Main Mode set successfully" message appears in
the status bar.
Page 24
©2005 Nokia Corporation
Nokia Customer Care
Company Confidential
Issue 01 04/2005