2118 (RH-77)
RF Description and Troubleshooting
Figure 21: RF Main Mode dialog box for synthesizer troubleshooting
4. Click Set.
Note: Be sure that the "RF Main Mode set successfully" message appears in
the status bar.
5. Read register templates N601(0) bits 10 and 11 for the UHF and Tx VHF lock
condition on the RF Register R/W dialog box.
6. Read register templates N700(0) bit 11 for the RX VHF lock condition.
Page 32
Figure 22: RF Register R/W dialog box for synthesizer setup
©2005 Nokia Corporation
Nokia Customer Care
Company Confidential
Issue 01 04/2005