Commissioning; Fitting Batteries (Not Included); Connecting The Answering Machine - AUDIOLINE 818G Operating Instructions Manual

AUDIOLINE 818G
1.

COMMISSIONING

1.1

FITTING BATTERIES (NOT INCLUDED)

As your AUDIOLINE 818G stores all information digitally, such as your greeting
message, all incoming messages and the day and time announcement, a 9 V
alkaline battery is required to safeguard the data during a power cut or if the mains
power supply should be accidentally disconnected.
The battery compartment can be found on the underside of your answering
machine. Remove the screw and open the battery cover.
Now connect the adapter to the battery. In doing so, ensure that the polarity is
correct.
Place the battery in the battery compartment, close the compartment and fasten
the cover with the screw.
Note: When the battery is discharged or no battery is fitted, the "flat
battery" warning light flashes. No battery power is required as long as the
answering machine is connected to the mains power supply.
1.2

CONNECTING THE ANSWERING MACHINE

Set up your answering machine near to the telephone and to a mains socket.
Connect the fixed telephone cable to your TAE socket (coding N = for
accessories such as answering machine / telefax). If you do not have the right
connection, please contact DEUTSCHE TELEKOM.
Plug the power supply into a properly installed mains socket. Your answering
machine signals that it is ready for operation by means of a signal tone and you
can now set the day and time and record your greeting message.
COMMISSIONING
21