Before Operation; Starting Up; Source Menu - LG LN700 Owner's Manual

Starting up

The navigation software and the digital map material
are supplied on the memory card. Installation occurs
relatively automatically.
1. Switch the Navigation device on.
2. Place the memory card in the navigation
system's memory card slot.
3. The navigation software is stored on the card
and can be started immediately.
4. The navigation device needs a few seconds to
start. (Map data is loaded in the background)
It may take some time until the GPS receiver has
acquired enough satellites during initial use of the GPS
navigation equipment.

Source menu

When you start the device the SOURCE menu is
displayed.
From this menu, you can tap:
• The NAVI button to open the Navigation System.
For more information, see "Getting Started with
Navigation" on page 21.
• The PHOTO VIEWER button to open the Photo
Viewer. For more information, see "Photo Viewer"
on page 66.
• The SET UP button to configure the device settings.
For more information, see "Device SET UP
Settings" on page 68.

Before operation

19