NOTE: Information regarding obtaining additional copies of this manual is located in the Introduction
chapter of this manual.
A battery charger is identified by model number. Incorporated into the model number is the 8-hour
ampere-hour capacity, case size, input power phase, and number of cells in battery for which charger is
intended. The following example explains the basic model numbering arrangement.
Model
750
C
3
18
R
80% Rated (Blank Indicates 100% Rated)
Number of Cells
Input Power Phase (1-Single Phase; 3-Three Phase)
Case Size (B, C,)
8-Hour Ampere-Hour Capacity
NOTE: This information is required for ordering certain replacement/service parts.
Need help?
Do you have a question about the AC1000 Control and is the answer not in the manual?