Page 2
FX-500 The Fysic FX-500 is an additional number dialler for memory numbers. You can assign handy photos or symbols to each button, allowing you to call the corresponding person or service by simply pressing a single but- ton. It’s also possible to use the number dialler as a “big button” keypad.
Page 3
Telephone Connect the supplied cable between the connection of your existing phone that’s now free and the ‘PHONE’ output ( 2 ) of the FX-500. You can now put the PTT plug back into the PTT socket. The FX-500 must be “charged” for at least 2 minutes before you can start programming.
Page 4
Repeat steps 1-4 to program the other phone numbers. To program as a “big button” keypad: You can also use the FX-500 as a normal keypad with large buttons. To do this, you don’t save an entire phone number underneath a photo but- ton, but only a single digit to be assigned to the corresponding button.
Page 5
3. The number will now be dialled. EXTRA NUMBER DIALLER CONN ECTION If a single FX-500 unit is not sufficient, you can connect a second num- ber dialler to expand the memory capacity. Refer to the diagram for connecting two number diallers.
Page 6
USEFUL TIPS When all of the memories are programmed and you want to move the FX-500, please keep in mind that the programmed memories remain for only several minutes after the telephone connection is interrupted. You could write the programmed memories down on a separate piece of...
Page 7
WARRANTY For the Fysic FX-500 you have a warranty of 24 months from the date of purchase. During this period, we guarantee the free repair of defects caused by material and workmanship errors. All this subjected to the final assessment of the importer.
Page 8
You must bring it to a collection point for the recycling of electric and electronic equipment. Service Help DECLARATION OF NETWORK COMPATIBILITY The Fysic FX-500 is designed for use on the ‘public switched telephone networks (analogue single line)’ of telephone service providers within the WWW.FYSIC.COM European Union. SERVICE@FYSIC.NL...
Need help?
Do you have a question about the FX-500 and is the answer not in the manual?
Questions and answers