Battery And Charging; Troubleshooting - Aiwa Lunatic MI-X280 User Manual

Battery & Charging
Charging the speaker:
Connect Type-C charging cable to the speaker and a suitable power source.
*Low Battery Warning: Flashing Red LED Indicator Lights
*White LED Indicator Lights reflects the battery level accordingly.
Approximate charging time: 3-4 Hours
Please fully charge up the speaker prior to first-time usage.

Troubleshooting

Unable to connect to device:
1. Please check if your mobile device supports A2DP profile
2. Please ensure the speaker is not connected to other devices
3. Please ensure the speaker is within 10m from the device
4. Please ensure the speaker is in pairing mode
(LED Indicator light blinking blue)
No sound is coming out of the speaker:
1. Please ensure your device is connected to the speaker. (LED Indicator
should be in blue (Non-blinking)).
2. Please ensure the music volume is at an audible level on both your mobile
device and speaker.
Perform a factory reset if the function buttons are not working/ any form of abnormalities
are observed during speaker usage: Insert a small pin into the designated reset hole and
hold it for two (2) seconds until the LED Lights extinguishes.