Kohler K-3399 Homeowner's Manual page 14

Modular Plug
Trip Button
8. Replace the Flush Button
Remove the Flush Button
CAUTION: Risk of injury or product damage. Do not let the
plug get wet.
CAUTION: Risk of injury or product damage. Handle vitreous
china very carefully.
Use the following steps to remove the flush button from the toilet:
NOTE: The flush button must be aligned before it can be installed.
Observe and note the outward orientation of the flush button.
Open the electrical circuit breaker for the toilet.
Use the supplied wrench to turn the locknut to release the hook
and remove the tank cover.
NOTE: The plug operates just like a modular telephone plug.
Press the tab on the modular plug at the flush button connection
to release the internal latch.
Unplug the cord from the back of the flush button.
Squeeze the snap-fit fingers on the flush button inside the tank.
114950-5-A
Snap-Fit Fingers
Trip Button
14 Kohler Co.