hestan KRP Series Installation Manual page 30

FINAL INSTALLATION
INSTALLING TWO OR MORE UNITS TOGETHER - CONNECTIONS INSTALLING TWO OR MORE UNITS TOGETHER - CONNECTIONS
Installing two or more units as built-ins next to each other requires a Central Connection Kit.
EN (Not included - must be ordered as a separate accessory)
AKRCJK (for KRB, KRC, KFC, KWC and KRW Models in Stainless Steel or color)
AKRCJK-OV (for KRB, KRC, KFC, KWC and KRW overlay models )
AKRCJKP (for KRP Models)
The appliance comes with side connectors on each side. The connector kit provides connectors
for the rear of the units, fasteners, and a trim cap for the center junction.
1/4" [6.5]
Wall
or
furniture
1/4" [6.5]
Wall
or
furniture
NOTE: The aluminum side connector (item A above) is typically pre-installed
on all refrigeration units at the factory. In mid-2019, a design change was
made and the aluminum parts were replaced by a kit included with the unit.
The kit contains 10 plastic side connectors that look like this.
Follow the instructions included with the kit to attach these new side
connectors.
28
© 2021 Hestan Commercial Corporation
Side and central profile mounting
Appliance
A
C
B
7/8" [22]
Aluminum side connector
A
B
Trim cover - side
C
Trim cover - center
Appliance
A
A B
C
A Aluminum side connector
B Trim cover - side
(CONT.)
1/4" [6.5]
Appliance
D
1-3/4" [44.4]
D Center connector fasteners
E Side connector fasteners to
cabinet - (installer/customer
provided)
1/2" [13]
Appliance
A
D
C Trim cover - center
D
Fasteners
1/4" [6.5]
Wall
furniture
A
E
B
7/8" [22]
1/4" [6.5]
Wall
or
furniture
B
A
or