hestan KRP Series Installation Manual page 28

Refrigerators, freezers and wine storage

Hide thumbs Also See for KRP Series:

Available languages

OVERLAY PANELS

MOUNTING OVERLAY PANELS TO DOOR

(CONT.)

Hook the panel to the hanger bolts starting

from the top aligning brackets (6).

After the panel is hooked on all hanger

bolts, install the two vertical adjustment

screws.

See (9) below.

At this point, alignment between the

panel and adjacent cabinets can be

adjusted using the alignment brackets and

brackets (7) and (8).

Vertical alignment: tighten or loosen the screws

in the brackets to raise or lower the panel. (9)

Depth alignment: working from the inside of

the door, after lifting up the magnetic seal,

adjust the panel position so it is closer to or

further away from the door using (10) and then

fix the panel in position using (11)

Table of Contents