LG 360 CAM User Manual page 8

Although SAR is determined at the highest certified power level, the actual SAR level of the
device while operating can be well below the maximum value. Because the device is designed
to operate at multiple power levels to use only the power required to reach the network, in
general, the closer you are to a wireless base station antenna, the lower the power output.
Before a device model is available for sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the government-adopted requirement
for safe exposure. The tests are performed in positions and locations (e.g., at the ear, worn
on the body, or hotspot) as required by the FCC for each model.
Body-worn Operation
This device was tested for typical body-worn operations with the back of the device kept 0
cm (0 inches) between the user's body and the back of the device.
FCC Part 15 Class B/IC RSS-Gen Compliance
This device complies with part 15 of FCC rules and IC license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The highest SAR value is:
Body (Body Worn/Hotspot): 1.3 W/kg
6