LG PC389P User Manual

Pocket photo snap
Hide thumbs


Quick Links

Owner's manual
Please read this manual carefully before operating
your device.
PC389P / PC389S / PC389SF
You can print easily the photo via
The actual device may differ from the image.



  Also See for LG PC389P

  Summary of Contents for LG PC389P

  • Page 1 Owner’s manual Please read this manual carefully before operating your device. MODEL : PC389P / PC389S / PC389SF You can print easily the photo via Bluetooth® The actual device may differ from the image.
  • Page 2: Safety Information

    Safety information WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN CAUTION OR MOISTURE. WARNING: Do not install this equipment in a confined RISK OF ELECTRIC SHOCK space such as a book case or similar unit. DO NOT OPEN CAUTION: Do not use high voltage products around CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK...
  • Page 3 This device is equipped with a portable battery or CAUTION concerning the Power Cord accumulator. The Power Plug is the disconnecting device. In case How to Safely remove the batteries or the battery of an emergency, the Power Plug must remain readily pack from the equipment: To Remove the old batteries accessible.
  • Page 4 WARNING: y Do not look through the view finder at the sun or other strong light. y The flash may turn on in dark places. y Do not wet your pocket photo or hold it with wet - Do not use a flash too close to a person’s eyes. hands.
  • Page 5 CAUTION: y Place the product on a sturdy, level surface. y The apparatus should not be exposed to water y When used by children, adult care is required. (dripping or splashing) and objects filled with liquids, y Do not use during exercise, walking or driving. such as vases, shouldn’t be placed on the apparatus.
  • Page 6 Note Device operating temperature When operating in cold weather, the device shall not print. Bring it inside from the cold and give about 10 minutes to adjust to the specified operating temperature (5 °C - 35 °C). Then try printing again. (For the appropriate use, it is recommended not to operate it outdoors in winter.) >...
  • Page 7: Table Of Contents

    Contents STEP 6 Printing Photo . . . . . . . . . . . . . . . . . . 19 Printing using Android phone .
  • Page 8: Step 1 Getting Started

    *Reset hole LED indicator Flash Shutter ( Power) button Simple manual LG Pocket Photo Printer (Reprint) button Paper exit slot Lens View finder *Reset hole : If you need reset, press the hole. USB cable (Type C) Strap y Depending on the model or region, supplied items may differ .
  • Page 9: Step 2 Inserting Photo Cartridge

    STEP 2 Inserting Photo Insertion part of Photo cartridge Cartridge Strap hole 1. Slide the cover button sideways to open the bottom cover. Cover button 2. Unpack the photo cartridge you bought.
  • Page 10 As shown in the following 4. Press the cover to close it completely. picture, knock lightly the photo cartridge in the direction of the arrow 2 or 3 times to align the paper to the back and put it in the pocket photo.
  • Page 11: About Photo Cartridge

    When opening the bottom cover to replace the photo cartridge, be careful not to touch the Use exclusive photo cartridge for LG Pocket Photo. inside of the Insertion part of Photo cartridge Otherwise, the print quality cannot be guaranteed, (print head) and its surroundings.
  • Page 12 Do not leave in a place where the temperature or humidity is too high or low. It may reduce Use exclusive Cartridge for LG Pocket Photo. the quality of the printed photo. y Using photo cartridge from other company...
  • Page 13: Step 3 Power On / Off

    STEP 3 > Caution Power On / Off Moving a pocket photo from a cold place to a warm place can cause dew on the inside / outside and print quality may deteriorate. In this case, please use after the dew has dried enough. Note y When turning the device on, LED indicator flashes for 3 seconds, then printing is...
  • Page 14: Step 4 Checking Battery Status

    STEP 4 Checking battery If the battery is low in use, LED indicators blinks quickly and turn off. status Charging Battery When you disconnect the pocket photo from the charging cable, you can check the battery charge status This device uses a built-in battery. Before using it, fully charge the battery using a USB cable (Type C) or via the LED indicators adapter.
  • Page 15 Do not place near heating appliance. y 0 % : Blinks quickly and turn off. y Do not disassemble or deform. y LG Pocket Photo is always charged when connected y Do not give shock on. to the power supply except for being printed.
  • Page 16: Step 5 Installing App

    From Play Store (Android market) y The operating time on battery may vary depending on the battery status, operational Search for “LG Pocket Photo” . status and environment conditions. Using QR code y When the battery is discharged, printing is...
  • Page 17: App Setting

    y Bluetooth : When you turn on Bluetooth in the App Setting Pocket Photo app, the Bluetooth on your Android phone turns on. Bluetooth® Set the options in [ Setting ] [Print Connection Mode]. y Shake & Print : When you turn on Shake & Print mode, select the desired photo from the main screen of the Pocket Photo app and then shake your smartphone to print.
  • Page 18: Installing App For Iphone

    Installing App for iPhone From App Store Search for “LG Pocket Photo” . Using QR code You can enter the App Store by scanning the QR code on the product box. Setting Bluetooth of iPhone 1. On your iPhone’s home screen, touch [Settings].
  • Page 19: Step 6 Printing Photo

    Bluetooth® Preparation : Turn the device on, and start printing with the LED indicator turning on. 1. Run LG Pocket Photo App on Android phone. 2. Select a photo to print, and touch [ ] (Print) on Pocket Photo App.
  • Page 20 > Caution y Check the power of the Pocket Photo, when your device can not search for Bluetooth device. y The photo file less than 10 MB can be printed in case of Android. y Setting screen may differ depending on the phone manufacturer.
  • Page 21 Setting Pocket Photo App of Android phone You can change setting of printing method and Automatic device power off in [Print setting]. 1. Run LG Pocket Photo App on Android phone. y Printing Method: You can set the printing method of 2. Go to [ Setting] .
  • Page 22: Printing Using Iphone

    LED indicator turning on. y It is recommended to keep default setting of the device. 1. Run LG Pocket Photo App on iPhone. 2. Select a photo to print, and touch [ ] (Print) on Pocket Photo App. 3. Touch [Print the photo] on the print window.
  • Page 23 Setting iPhone Pocket Photo App You can check device condition, battery status, total printed photos, MAC address and firmware version. 1. Run LG Pocket Photo App on iPhone. (To check [Device information], set to [On] the Bluetooth of iPhone.) 2. You can check the device information by touching...
  • Page 24 You can change setting of printing method and Note Automatic device power off in [Print setting]. y If you change the time of Automatic Device y Printing Method: You can set the printing method of Power Off, the maximum number of prints can photo.
  • Page 25: Using The Edit Mode

    (drawing tools), frames, and more. You can also calibrate your photos through various y Use the lastest App of LG Pocket Photo ( when filter modes. printing a photo, it makes optimized image.) Note y The higher resolution the image has, the higher quality the printed photo has.
  • Page 26 > y The Bluetooth searching and transferring may fail Caution depending on its environment. Check the Bluetooth y Do not pull paper out by force during printing. condition on your phone and try again. y Do not open the cover during printing or do y If pairing multiple smartphone, re-pairing may occur.
  • Page 27: Checking Where To Buy Paper

    Checking where to buy paper y The printing quality may differ depending on 1. To check where to buy paper, go to [ setting]. the original image (When too dark or dim). 2. After touching [Where to buy paper], select a Use the image after correcting it using Pocket country.
  • Page 28: Updating The Device

    Updating the device Note You can update the device by pairing smart phone to y During the device update procedure, do not the latest software to enhance the products operation turn off the power or press Reset button. and /or add new features. y This device cannot be updated to previous 1.
  • Page 29: Step 7 Taking Photos And Instant Printing

    STEP 7 3. Hold the Pocket photo, confirm the desired Taking photos and composition of the final image by using view finder. (It is recommended that you use the viewfinder instant printing eyepiece within 10 mm.) Taking photos 1. Press (power) button for 2 seconds to turn on.
  • Page 30 Note on taking photo (Reprint) button y Be careful not to touch the lens surface when you take the photo. Shutter y Use a blower, cotton bud and soft cloth to remove dirt on the lens or view finder. y Do not interrupt the flash, lens or paper exit View finder slot with finger or strap.
  • Page 31 Note y Do not leave the view finder in places exposed y The subject will be out of focus if the distance to strong sunlight. Personal injury or fire is less than 0.5 m. could result if the lens should accidentally concentrate the sunbeams on an object or a y Keep your eyes close to the viewfinder when person.accidentally concentrate the sunbeams...
  • Page 32: Printing Black-And-White Photo

    > Printing black-and-white photo Caution If you switch your pocket photo to black-and-white y You can not switch to black-and-white shooting mode, you can print the photo in black and shooting mode, If do not have a photo white when taking photos. cartridge in pocket photo.
  • Page 33 Note 3. Press Shutter button for 5 seconds. The will light up in white and switch to black-and-white y When printing via the Pocket Photo app, the shooting mode. camera prints in color even if it is set to black- and-white shooting mode.
  • Page 34: Using A Strap

    Using a strap Wind(Attach) the strap as follow the photo to prevent In case there are more than a LG Pocket Photo device, dropping the Pocket photo when you carry the Pocket check MAC address on the product label to choose one photo or take a photo.
  • Page 35: About Led Indicator

    About LED Indicator The LED indicators shows the device condition. Product label. : LED On : LED Blinks 프린트 대기/ 켜짐 (흰색) : LED Off 전원을 켤때/ Section LED color Condition Description 깜박임 2. You can find the product label. (흰색) To print, turn 전원...
  • Page 36 인쇄 중 인쇄 준비 배터리 30% 업데이트 Section LED color Condition Description Section 이상(흰색)/ LED color Condition Description 프린트 대기/ 프로그램 5장 이상 출력 켜짐 읽는 중 배터리 30% 가능 (흰색) 프린트 대기/ 이상(흰색)/ Waits for 켜짐 Remaining 5장 이상 출력 인쇄...
  • Page 37 용지 부족 커버 열림 용지 걸림 에러 Section LED color Condition Description Section LED color Condition Description 리프린트할 출력물 없음 Printing When you take (3회) black-and- 인쇄 준비 (While a photo, black 업데이트 white shooting 흑백모드 프로그램 continuous and white 리프린트할...
  • Page 38: Specifications

    Specifications Section LED color Condition Description No paper, Insert the Paper jam/ photo cartridge Paper size 63 mm x 94 mm Blinks then try again. Image Sensor CMOS Turn down Resolution the lens cover 310 dpi Closed the lens (Print) switch when cover/ Blinks 용지...
  • Page 39 Flash Auto (White LED) Power / Waiting / Bluetooth transmitting / Charging / Error PNG, JPEG (Baseline) / less than Image file type/ LED indicator / Condition of printer/ Update / 10 MB (Progressive JPEG is not size Black-and-White shooting mode supported.) setting Media paper...
  • Page 40: Troubleshooting

    Troubleshooting y Your phone may be incompatible with the device depending on its manufacturer, environment or (Android or iOS) operating system. Symptom Cause / Solution y Design and specifications are subject to change No power The battery is discharged. without prior notice. Be sure the device is connected to charger or PC properly when y All other product and brand names are trademarks...
  • Page 41 The paper is White space When print mode is set to 1. Turn the device off and on jammed before appears at the edge again then paper is ejected [Image Full] , white space may printing. of the paper. automatically. appears if the aspect ratio of the paper and your image is not The paper is...
  • Page 42 Device does not Preheating is needed. Wait for Symptom Cause / Solution print. about 2 minutes. The printed Take a photo with a distance of at Be sure there are papers in the photo is out of least 0.5 m between you device.
  • Page 43: Paper Jam Solution

    Paper Jam Solution The printed Keep your eyes close to the photo is viewfinder when taking photos. Do not pull the paper out. Turn the device off and on different from Then confirm the desired again, the paper will be ejected automatically. the image composition of the image and y If there are foreign substance or dust on the inside...
  • Page 44 Paper Jam Solution 2. Gently pull the remaining photo paper out of the Insertion part of Photo cartridge. 1. Slide the cover button sideways to open the bottom cover and then remove the photo cartridge.

This manual is also suitable for: