LG WT22WS6HP Owner's Manual page 71

global_main.book.book Page 23 Thursday, August 13, 2020 4:39 PM
Wash (Lavado)
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash (Lavado) button until the desired
wash time is selected.
Rinse (Enjuague)
Use this option to change the number of rinses.
• Press Rinse (Enjuague) button to change the
number of rinses.
• When the Rinse (Enjuague) option is selected,
l icon is lit.
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin (Centrifugado)
Use this option to change the spin strength. When
you press the START/PAUSE (INICIO/PAUSA)
button after selecting this option, the remaining
time is indicated on the display.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to redistribute the clothes evenly.
• Select 60 minutes for cotton laundry and 120
minutes for synthetic fibre laundry for effective
moisture reduction.
To Use the Air Dry (Secar Con Aire) Function
When you select Air Dry (Secar Con Aire), you can
reduce the drying time by minimizing the moisture
that remains within the clothes.
• Press the Spin (Centrifugado) button for 3
seconds to select and press the POWER
(ENCENDIDO/APAGADO) button to deselect.
Using Special Options
You can customize the programmes by using the
following special options:
Turbo Wash (TurboWash)
Adding this option reduces the programme time
but the similar washing results will be provided.
Strong Wave (Onda Fuerte)
Use this option to change the strong water wave.
• It is set to medium water wave by default and it
is not indicated on the display.
Follow the next steps to use a special
option.
1
Press the POWER (ENCENDIDO/APAGADO)
button.
2
Select a washing programme.
3
To use special options, press Turbo Wash
(TurboWash) or Strong Wave (Onda Fuerte)
button.
4
Press the START/PAUSE (INICIO/PAUSA)
button.
Using Basic Options
Time Delay (Diferir Tiempo de Lavado)
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER (ENCENDIDO/APAGADO)
button.
2
Select a washing programme.
3
Press the Time Delay (Diferir Tiempo de
Lavado) button to set the required delay
ending time.
4
Press the START/PAUSE (INICIO/PAUSA)
button.
OPERATION 23 EN