Moen Gibson 21550 Installation Manual

SINK DESCRIPTION
• Manufactured of 19 gauge type stainless steel
• Two bowls are 18" x 18" x 9" Deep & 10" x 15" x 8" Deep
• The sink ledge has two fixture mounting holes,
1-1/2" in diameter and 8" on center
• Has two Easy Clean Drains, provides more usable sink space,
fits most standard garbage disposal units
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• Made in U.S.A.
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 32-3/8" x 21-3/8", with a
5/16" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certified to ASME A112.19.3/CSA B45.4 and
all applicable specifications referenced therein
WARRANTY
• Warranted for ten years against material or
manufacturing defects
9"
(229mm)
18"
(457mm)
9"
(229mm)
9"
(229mm)
10-3/4"
(273mm)
6/13
18"
(457mm)
33"
(838mm)
15"
(381mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
3-1/8"
(79mm)
8"
(203mm)
3"
(76mm)
7-1/2"
(190mm)
15"
(381mm)
5"
(127mm)
10"
(254mm)
8"
(203mm)
9-3/4"
(248mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
®
Gibson
Kitchen Sink
Model: 21550
SINK OVERALL DIMENSION
SEALANT MATERIAL
COUNTERTOP CUT-OUT
COUNTERTOP
SINK
CLAMP
Installation Detail
22"
(559mm)
www.moen.com