Download Print this page
IMOU Cue 2 Quick Start Manual
Hide thumbs Also See for Cue 2:

Advertisement

Quick Links

About the Guide
- This quick start guide is for reference only. Minor difference might be
found in user interface.
- All the design and software here are subject to change without prior
written notice.
- All trademarks and registered trademarks mentioned are the
properties of their respective owners.
- Please visit our website or contact your local service engineer for
more information.
- If there is any uncertainty or controversy, please refer to our final
explanation.
Operating
With Imou App
Step 1
Scan the following QR code or search "Imou" in Google Play or App
Store to download and install Imou App.
Step 2
Run Imou App, and then register an account for first use.
Step 3
Connect the camera to power source with the power adapter.
Step 4
Wait for booting to be finished, and then the camera indicator flashes
with green light.
Step 5
Connect your smart phone to your Wi-Fi network, and make sure your
smartphone is connected to Wi-Fi network with 2.4 GHz band, and then
do the following operations to finish adding camera.
Note:
If you have more than one camera, do step 5 to add them one
by one.
If the Wi-Fi network changed or the indicator status goes wrong,
reset the camera, and then do step 5 to add it again.
Installing Camera
When installing the camera with mounting surface, make sure
the mounting surface is strong enough to hold at least three
times of the device weight.
When installing the camera with mounting foam, make sure
the mounting surface is smooth. Stick the mounting foam on
the camera pedestal, and then attach the pedestal on the
mounting surface, press and hold it for 10 s.
Mounting Surface
Positioning Map
Expansion Bolt
Mounting Plate
Self-tapping Screw
Camera
Step1
Drill screw holes on the mounting surface as the mounting map
shows, and then put in the expansion bolts.
Step2
Attach the mounting plate to the mounting surface with the
self-tapping screws.
Step3
Attach the camera to the ferromagnetic mounting plate, then
power it up, and then, adjust the lens to the ideal angle.

Advertisement

loading

Summary of Contents for IMOU Cue 2

  • Page 1 Step 4 the mounting surface is strong enough to hold at least three Scan the following QR code or search “Imou” in Google Play or App Wait for booting to be finished, and then the camera indicator flashes times of the device weight.
  • Page 2 Camera Introduction Built-in Speaker Micro SD Card Slot LED Indicator Power Port Reset Button Camera ×1 Power Adapter ×1 Power Cable ×1 Lens Quick Start Guide Note: Press and hold the reset button for 10 s to reset the camera. The pattern of the LED indicator is included in the following table.