Advertisement
4. CONTENTS
fig.1
Cable USB to
3.5mm Jack Plug
5. OPERATION
5.1.
OPERATION
WARNING! Ensure that you read, and fully understand the safety instructions before use.
5.1.1. Charge the battery fully before use. Whilst charging, a red LED shows in the SMD display; a green LED shows when charged.
IMPORTANT: Ensure the light (lamp or torch function) is turned 'Off' whilst charging. Failure to do so will damage the charger plug.
3.1.2. The penlight can be charged from the supplied mains adaptor charger or from a computer (5VDC) via the supplied USB cable and 3.5mm
jack plug. The charging jack plug is connected into the charging port in the opposite end to the lamp array. Lift the tab to reveal the input
socket.
5.1.3. A full charge takes approximatelty 4 hours, allowing up to 4 hours of use.
5.1.4. As this light is fitted with a lithium-ion battery, it can be charged at any time; there is no 'memory' effect with this type of battery.
5.1.5 . The first press of the switch (fig.1) illuminates the CREE LED in the end (torch), the second press illuminates the SMD's arranged on the
switch side (lamp) of the unit and extinguishes the torch. The third switch turns off the SMD's; all lights are now extinguished.
WARNING: Ensure that the penlight (lamp or torch function) is pointing away from you before operating the switch. As previously
mentioned in General Safety; DO NOT shine directly into your, other person's or animal's eyes..
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes
completely unserviceable and requires disposal, dispose of the product and the fluids according to local regulations.
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Dispose of this product at the end of its working life in compliance with the EU Directive on
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Charger
USB Port
Environmental Protection
WEEE Regulations
Battery Removal
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
LED035.V2
Issue: 1 - 06/11/15
Advertisement
