LAVAZZA firma INOVY & MILK Instructions Manual page 69

The display will show the following animation.
Press the MULTIFUNCTION button
The machine will start the rinsing cycle.
At the end of supply, rinsing is completed.
MACHINE SETUP
System filling
The "System filling" function allows to start filling
of the hydraulic circuit if the circuit is not properly
filled.
During circuit filling, the display will show the fol-
lowing animation.
to confirm.
FILTER
The "Filter" function consists of a further sub-
menu allowing to manage the softener filter.
➤
➤
➤
➤
➤
➤
Statistic
The "Statistics" parameter displays the filter wear
level percentage diagram.
Insert new filter
The "Insert new filter" function allows to insert
the softener filter in the water tank.
Follow the instructions to complete the softener
filter inserting procedure.
Remove and empty the water tank, insert the sof-
tener filter in the water tank. Fill the tank with fresh
still mineral water.
Statistic
Insert new filter
Change filter
Remove filter
Back
Exit
EN
69