LAVAZZA firma INOVY & MILK Instructions Manual page 60

EN
CLEANING THE MILK UNIT
Rinse the milk module by performing the
RINSING" function (refer to the
"FROTHER
"CLEANING" paragraph of the
MENU
chapter).
The SKIMMER RINSE function must always
be performed after a milk-based beverage has
been prepared.
Rinse the milk tube by performing the
CLEANING" function (refer to the "CLEANING"
MACHINE MENU
paragraph of the
The MILK CLEANING function must be per-
formed every week, by using suitable products
for milk cleaning.
Pull out the dispenser assembly by pressing the
side levers.
Use a non-abrasive soft sponge or cloth to clean
the milk tube inlet available.
Milk tube inlet
60
MAINTENANCE AND CLEANING
MACHINE
"MILK
chapter).
Remove all components inside the dispenser as-
sembly.
Clean the components with cold or lukewarm wa-
ter, then dry it and refit it correctly.
The dispensing unit must be removed and cleaned
every week.