Display
6.3 Settings menu
For optimum performance of the appliance, set values can be
modified in the settings menu to adjust the appliance to the
installation situation; refer to chapter 13 for a list of the set va-
lues. A number of set values, such as the air flow rates, are laid
down in the design data.
Warning:
Because changes may affect the proper performance of the
appliance, changes of settings not described here require
consultation with Ubbink.
Incorrect settings may seriously affect the proper perfor-
mance of the appliance!
Modifying the set value in the settings menu:
1. In operating mode, press the 'MENU' key.
1 x
2. Press the 'Menu' key to activate the "settings menu".
settings menu is active
2 x
3
Select the set value to be modified with the '+' or '- ' key.
Setting value
Step number
setting value
Selection setting value to be modified
22
4
Press the 'Menu" key to select the required set value.
5
Use keys '-' and '+' key to modify selected set value.
6
Store modified set value
Do not store modified set value
7
To modify other set values, repeat step 3 - 6. When you
do not want to modify any more set values and return to
operating situation, then press the 'R' key.
.
Ubiflux W300(+) / W400(+) / W450(+)
1 x
Store modified set value
1 x
Modified value Do not store
Back to operating mode
Chapter 6
1 x