Related Manuals for ABB 1SLC805002F0001
Summary of Contents for ABB 1SLC805002F0001
- Page 1 Teknisk katalog Gemini Utdrag Low voltage electric insulating switchboards 1SEC800010C2101...
- Page 2 Introduction Characteristics of Gemini switchboards Gemini, something Gemini switchboards are made with co-injection, completely different in which ABB SACE is the first manufacturer in the switchboards electric field to use as a molding technique. This ABB SACE’s Gemini range is process obtains a “sandwich”...
- Page 3 Introduction Characteristics of Gemini switchboards Nothing can be compared with Gemini, even when the switch- Gemini is made in a thermoplastic material that has boards have reached the end of a very low halogen content and is 100% recyclable. their life cycle: they are totally The environmental compatibility of Gemini is an ecologically compatible.
- Page 4 Introduction Characteristics of Gemini switchboards A switchboard that is not just one system, but three Written in full, its name “Protect IT Multipurpose Box Gemini” says that no switchboard is more reliable. Gemini is the result of design Integration of Gemini with other ABB low voltage work conducted by ABB with protection, monitoring and control products fulfils the the direct collaboration of...
- Page 5 Characteristics PROTECTION IP66 (IEC EN 60529) grunnenhet Class II insulation STRENGTH Thermoplastic material moulded in co-injection automasjon Resistance to abnormal heat and fire up to a temperature of 750 °C (IEC EN 60695-2-1) IK10 (IEC EN 50102) degree of resistance to impacts distribusjon Protection against chemical and atmospheric agents (water, saline solutions, acids, basic agents, mineral oils, UV rays)
-
Page 6: Order Codes
Order codes Basic configurations replaced by locks of another that protects it from accidental In the basic configuration, tools; the fact that they open at type available in the accesso- damage until wiring is com- Gemini switchboards are com- an angle of more than 180° ries. - Page 7 Order codes / el.nummer Basic configurations Size Dimensions Modules Codes / el.nummer Boxes and doors • Available in 6 sizes • Single order code combined with box and transparent and opaque door • Pack with door dismounted and wrapped separately •...
- Page 8 Order codes / el.nummer Basic configurations Size Internal dimensions External dimensions Codes Unit/Pack Conf./Imb. Single box WxHxD (mm) WxHxD (mm) 335x400x210 250x300x180 1SL0221A00 460x550x260 375x450x230 1SL0222A00 460x700x260 375x600x230 1SL0223A00 590x700x260 500x600x230 1SL0224A00 590x855x360 500x750x330 1SL0225A00 840x1005x360 750x900x330 1SL0226A00 Size Box dimensions Codes / el.nummer Single doors Transparent...
- Page 9 grunnenhet automasjon distribusjon tilbehør...
- Page 10 Order codes Components for automation applications Gemini switchboards are de- applications, not only is it pos- to carry out these operations. signed to be perfectly compa- sible to select the box and door To finish the job, the inner door tible with ABB components for in the required size, but you can can be mounted (reversible and...
- Page 11 Order codes / el.nummer Components for automation applications Size of the switchboard Code / el.nummer Unit/Pack Base plates • Available in three versions in blank or drilled metal and insulating material • Positioning at 3 different depths for size 1, 4 different depths for sizes 2-3-4 and 7 different depths for sizes 5-6 (adjustments with 30 mm pitch) •...
- Page 12 Order codes Components for automation applications Code Dimensions Weight (kg/m) Unit/Pack-meters Wiring ducts • Made in self-extinguishing thermoplastic material (UL 94 V0), resistant to abnormal heat and fire up to 960 °C (IEC 695-2-1) • RAL 7035 grey color • Available in version with 8/12 mm and 4/6 mm slots •...
- Page 13 grunnenhet automasjon distribusjon tilbehør...
- Page 14 Order codes Components for distribution and mixed applications In distribution and mixed appli- cations, the Gemini switchboard is designed to be fitted with Sy- stem pro M modular devices and Tmax moulded-case circuit breakers. The frame is the load-bearing element of the configuration: The DIN rail is supplied with special DIN rails, partial modular plates hooks already in position for attaching...
- Page 15 Order codes / el.nummer Components for distribution and mixed applications Size of the switchboard Code / el.nummer Unit/Pack Uprights • Incorporated vertical wiring duct (ABB patent) • Snap-on mounting of all components (installation pitch of 75 mm) • Snap-on insertion into box •...
-
Page 16: Blank Panels
Order codes / el.nummer Components for distribution and mixed applications Size of the switchboard Code / el.nummer Unit/Pack Drilled panels • Supplied with DIN rail complete with supports to snap onto uprights and adjustable in depth • Available in 1 module (H 150 mm) and 1+1/2 module (H 225 mm, sizes 2-6) dimensions •... - Page 17 Order codes / el.nummer Components for distribution and mixed applications Size of the switchboard Code / el.nummer Unit/Pack Partial modular plates • Available in 1 module (H 150 mm) and 2 module (H 300 mm, sizes 2-6) dimensions • Snap-on mounting onto uprights with depth adjustment 1 module 1SL0296A00 / 2444360 1SL0297A00 / 2444361...
- Page 18 Order codes Components for distribution and mixed applications Size of the switchboard Code Unit/Pack Wiring kit • Composed of wiring duct in versions 25x60 mm and 40x60 mm (WxH, 8-12 mm slots) and Fix-O-Rapid • Snap-on mounting on uprights with depth adjustment Wiring duct 25x60 mm Wiring duct 40x60 mm 1SL0353A00...
- Page 19 grunnenhet automasjon distribusjon tilbehør...
- Page 20 Order codes Accessories tection when the door is open Gemini switchboards have the and pedestal make it easier to same accessories for both au- in distribution and mixed con- install the switchboards in any tomation and distribution appli- figurations. context. cations, ensuring maximum ver- Three different kinds of locks are satility and integration of fun-...
-
Page 21: Mounting Elements
Order codes / el.nummer Accessories Code / el.nummer Description Unit/Pack Locks • Available in three versions with ciphered key and handle, with triangular and square impressions 1SL0340A00 / 2444390 Lock with Yale type ciphered key and handle 1/10 1SL0341A00 / 2444391 Lock with triangular impression 1/10 1SL0339A00 / 2444389... -
Page 22: Other Accessories
Order codes Accessories Code / el.nummer Description Unit/Pack Anti-condensation kit • Kit in special material to prevent condensation from forming inside the switchboard: it include GORE MEMBRANE VENTING • Impermeable to water (pressure): 1 bar • Air flow: 68/h (dp = 70 mbar) •... - Page 23 Order codes Rapid selection table Basic configuration No. of Size installable No. of External Internal Complete switchboard Door DIN modules vertical mod. dimensions dimensions (mod. x row) (H=150 mm) Trasparent door Opaque door Transparent Opaque 1SL0211A00 1SL0201A00 1SL0221A00 1SL0241A00 1SL0231A00 24 (12x2) 1SL0212A00 1SL0202A00...
- Page 24 Order codes Rapid selection table Components for automation Components for distribution Inner door Base plate Uprights DIN rail Drilled panel Blank panel Modular plate Blank Drilled Insulating H=150 mm H=225 mm H=75 mm H=150mm H=300 mm H=150 mm H=300 mm 1SL0259A00 1SL0275A00 1SL0267A00...
-
Page 25: Technical Information
Technical information Technical characteristics Table of Gemini switchboards’ technical characteristics Size Gemini with transparent door 1SL0211A00 1SL0212A00 1SL0213A00 1SL0214A00 1SL0215A00 1SL0216A00 Gemini with opaque door 1SL0201A00 1SL0202A00 1SL0203A00 1SL0204A00 1SL0205A00 1SL0206A00 External dimensions WxHxD (mm) 335x400x210 460x550x260 460x700x260 590x700x260 590x855x360 840x1005x360 Internal dimensions WxHxD (mm) 250x300x180 375x450x230... - Page 26 Due to possible developments of standards as well as of materials, the characteristics and dimensions specified in UNI EN ISO 9001 the this document may only be considered binding after confirmation by ABB. ABB A/S Automasjonsprodukter Jacob Borchsgt. 6 3012 Drammen Tel.: 81520915 - Telefax: 32858010 http://www.abb.no...