Delta PPM CT16 101 Quick Installation Manualline

● This document briefly explains how to install a current sensor.
More H5A details please scan QR-code to user manual.
_222
http://www.deltaww.com/Products/CategoryListT1.aspx?CID=05010101&PID=4866&hl=en-US&Name=H5A_222
This document applies to H5A
Do not pull the cable strongly.
If the direction and location of the current sensor are wrong or the lock is
incomplete, accurate measurement will not be possible.
Also, if you drop or apply an impact, accurate measurement will not be possible.
The current sensor has polarity. Install the current sensor so that the power
company side is on the grid side and the indoor side is on the main earth leakage
breaker side.
Make sure that the connector of the current sensor to be connected and the
cable for the current sensor are connected correctly.
1. Accessories contents
No Object
Current sensor
1
（Φ16）
Current sensor
2
cable
Quick Installation Guideline
Grid-tie Transformerless Solar Inverter
Current sensor for H5A
Caution
.
_222
Exterior Qty
1 PPM CT16_101
10m: PPM W2_210
1
30m: PPM W2_230
2. External dimensions
_222
31mm
18.5mm
3. Remove the function port
Model
29mm
44.5mm
30mm
Φ16
150mm
* Screw torque required for
assembling: 8±2 kgf-cm
Digital input
150mm
L
10000mm
or
30000mm
Dry contact
Power meter