BenQ MX812ST User Manual page 52

•
•
•
•
4. The Advanced Settings page allows you to configure Q Presenter.
•
•
•
•
5. Disconnect
To disconnect from the projector(s), click the Disconnect icon.
• Be sure to turn off other virtual network control programs before using Q Presenter.
• Firewall in the PC must be switched off to allow Q Presenter and USB Display to work.
• Wireless keyboard mouse combo is not supported by Pixelworks currently.
52 Operation
The Q Presenter only accepts up to 8 characters consisting of English capitalized
letters and digits 0-9 for the name, full 6 digits consisting of 1 to 4 for the
password.
To change the Q Presenter interface language, click the down arrow to reveal a
drop-down list and select a desired language. Click Apply.
To allow notification messages to appear, click Yes. Click Apply.
To display your computer screen on multiple projectors, click Activate 1:N
Display. Click Apply. It can display up to 8 projectors at the same time.
To display still pictures, click the down arrow to reveal a drop-down list and
select Graphic. Click Apply. To display video clips, click the down arrow to reveal
a drop-down list and select Video. Click Apply.
Graphic mode: worse image quality but faster transmission speed.
Video mode: better image quality but slower transmission speed.
However, the actual transmission speed was determined by the network traffic at
that time.
To adjust the capture rate, move the slide bar. The network bandwidth may also
affect the performance.
To launch Q Presenter when your computer operating system is started, click Yes
for Boot and launch. Click Apply.
To link to the Projector Network Display System web page, click Link.