Table of Contents
Advertisement
Connecting an HDMI source device
The projector provides a HDMI input jack that allows you to connect it to an HDMI source
device like a DVD player, a DTV tuner or a display.
HDMI (High-Definition Multimedia Interface) supports uncompressed video data
transmission between compatible devices like DTV tuners, DVD players and displays over a
single cable. It provides pure digital viewing and listening experience.
Examine your Video source device to determine if it has a set of unused HDMI output jacks
available:
•
If so, you can continue with this procedure.
•
If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an HDMI source device:
1.
Take an HDMI cable and connect one end to the HDMI output jack of the HDMI
source device. Connect the other end of the cable to the HDMI signal input jack on the
projector. Once connected, the audio can be controlled by the projector On-Screen
Display (OSD) menus. See
2.
Connect the other end of the HDMI cable to the HDMI jack on the projector.
•
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
•
In the unlikely event that you connect the projector to a DVD player via the projector's
HDMI input and the projected picture displays wrong colors, please change the color
space to YUV. See
•
The projector is only capable of playing mixed mono audio, even if a stereo audio input is
connected. See
"Audio Settings" on page 52
"Changing Color Space" on page 31
"Connecting audio" on page 20
for details..
for details.
for details.
Connection
21
Advertisement
Table of Contents
