Cambridge Audio AXR100D Manual page 9

SPEAKER B CONNECTIONS
The Speaker B connections on the back of the amplifier allow for a second set of
speakers to be used (i.e. speakers located in another room).
The Speaker A/B button on the front panel and remote control allows the two sets
of speakers to be toggled on and off. Refer to the Front Panel or Remote Control
section of this manual for more information on the Speaker A/B operation.
Either A or B, or both A and B may be selected for use.
AXR100D
BI-WIRE CONNECTIONS
If your loudspeakers are equipped with two sets of terminals, then it is possible
to connect them in the bi-wire configuration. Bi-wiring sends the bass and treble
frequencies down separate speaker cables, resulting in a clearer, more focussed
sound.
Right
speaker
Speaker A
Main Room
DAB / FM
Antenna
Speaker B
Room Two
HF HF
LF
LF
Note: When using two pairs of speakers, use speakers with a nominal impedance
of 8 ohms each.
Note:
– Speaker A and B must both be selected for this type of connection to work.
– Remove the bi-wire link on the speaker terminals before connecting. Refer to
your speakers' manual for more information.
HF
LF
AXR100D
Left
speaker
HF
LF
9