Operating instructions Last updated: 九月 27, 2022 03:17. Revision #6323 After making any connections to your unit, activate the AXR by pressing the Power On button on the front of the unit. SELECTING THE SOURCE Press the Source button on the front of the unit corresponding to your desired source. Alternatively, you may use the appropriate button on the remote control.
Page 18
The volume is displayed in minus dB. 0dB is the highest level. A progressively larger negative number indicates the volume is being reduced. ADJUSTING THE AUDIO SETTINGS Adjustments to the bass, treble and balance can be made as follows: To enter the audio menu. Press either the Menu button on the front of the unit or on the remote control. Step through the available settings by pressing the Menu button.
Page 19
Repeatedly pressing the FM/AM button on the front of the unit switches between FM and AM modes. Note: For ease of tuning on first time use, we recommend that you set the AXR to ‘Auto’ mode. Press the Mode/Store button on the front of the unit. This button cycles through Preset, Auto and Manual, modes.
Page 20
Press the 'FM / AM' button to switch between bands, and the banks of FM and AM presets. Notes: In ‘Store’ mode, if no button is pressed quickly (within 2 seconds), the unit will come out of ‘Store’ mode and the preset will not be saved. TUNER SETTINGS It is possible to change the tuner region settings for this unit.
Page 21
FACTORY RESET To restore the AXR to its factory settings and clear all stored presets for both AM and FM: Press and hold both the 5/10 and Menu buttons at the same time. The unit will display ‘Reset’. Restart the unit by powering off and on.