Connections - Cambridge Audio AXR100D Manual

Connections

LOUDSPEAKERS
Check the impedance of your speakers. You can use types with an impedance of 8
Ohms.
The red coloured speaker terminals are positive (+) and the black speaker terminals
are negative (-). Make sure correct polarity is maintained at each speaker connector
or the sound can become weak and "phasey" with little bass.
USING BARE WIRE CONNECTIONS
Prepare the speaker cords for connection by stripping off approximately 10mm (3/8")
or less of the outer insulation. More than 10mm could cause a short circuit. Twist
the wires tightly together so there are no loose ends. Unscrew the speaker terminal,
insert the speaker cable, tighten the terminal and secure the cable.
Note: All connections are made using standard loudspeaker cable.
BASIC CONNECTION
The diagram below shows the basic connection of your unit to a CD player, turntable
and a pair of loudspeakers.
8
DAB / FM
Antenna
Designed & Engineered in Great Britain
Assembled in China
S/P DIF
L
AXC35 Co-axial
Compact Disc Player
R
Digital Output Line Output
USING BANANA PLUGS
We recommend using Banana plugs with our units to establish a secure connection
and ensure there are no loose strands of wire that may cause unwanted noise or
interference.
Once you have stripped the outer insulation of the cable and twisted the wires as
indicated above, securely connect these to your banana plugs, remove the dust cap
from the end of the speaker terminal and push the plug in as far as possible without
applying excessive force.
Power Rating : 100–240V AC ~ 50/60Hz
Rated Power Consumption: 15W
Power AC