Bottom Cover Removal; Install Bottom Cover - Ariens Sno-Thro Compact Series Service Manual

BOTTOM COVER REMOVAL

IMPORTANT: Save all hardware for reinstallation.
WARNING: AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See Draining Fuel System on page 7.
Make sure unit is secure and will not tip.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Place unit in service position. See Service Position on
page 7.
4. Remove hardware retaining bottom cover to frame
and remove cover. See Figure 14.
Figure 14
IMPORTANT: For track models, track angle must be in the
"Raised Position" to remove bottom cover. Refer to
Operator's Manual. See Figure 15.

Install Bottom Cover

1. Secure bottom cover to frame with six hex screws.
2. Return unit to operating position.
3. Reconnect spark plug wire and fill fuel tank.
EN – 11
Figure 15