Connecting Video Source Devices - BenQ MP776 User Manual

Connecting video source devices

Connecting video source devices
Connecting video source devices Connecting video source devices
You need only connect the projector to a video source device using just one of the
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the video source device as described below:
Terminal
name
HDMI
Component
Video
S-Video
Video
Connecting audio Connecting audio
Connecting audio Connecting audio
The projector has two built-in mono speakers which are designed to provide basic audio
functionality accompanying data presentations for business purposes only. They are not
designed for, nor intended for stereo audio reproduction use as might be expected in home
theater or home cinema applications. Any stereo audio input (if provided), is mixed into a
common mono audio output through the projector speakers.
If you have a separate sound system, you will most likely want to connect the audio output
of your video source device to that sound system, instead of to the mono audio projector.
The audio connections illustrated on page
You need not connect audio to the projector if there is an alternate sound system available,
or if audio is not required.
20 Connection
Terminal appearance Reference
"Connecting an HDMI
device" on page 21
"Connecting a Component
Video source device" on
page 21
"Connecting an S-Video/
Composite Video source
device" on page 22
18 are provided for informational purposes only.
Picture quality
Best
Better
Good
Normal