Table of Contents
Advertisement
Overview of Navigation and Controls
Date/Time
32
Figure 4-48 User Setting 1
Finally, click Save to save the settings
Figure 4-49 Reset
Set Display and Synchronization Mode
Figure 4-50 Set Display and Synchronization Mode
Users can choose to display time or not on the camera screen. And if a user
ticks ON then the user can go on to choose Synchronization Mode.
Set Date and Time Manually
Set up the camera's date and time in the Set Date and Time Manually field.
Figure 4-51 Set Date and Time Manually
Set Date and Time By NTP Server
1. Time Zone: Select the time zone where your camera is located.
2. NTP Server: Select NTP in the Synchronization Mode. If "NTP" is selected,
the date and time will be synchronized by the NTP server.
3. Time Adjustment Period :Users can choose time adjustment intervals
4. Finally click Save &Test
.
Advertisement
Table of Contents
