Game Winner PL201GW Instruction Manual page 17

STEP 5
5. Secure rear of the seat assembly (19) to left (8) and
right (9) seat supports using two 1/4-20 x 2-3/4 IN
bolts (37), four orange plastic washers (40), two
plastic spacers (38) and locknuts (41). SEE FIGURE
5.
NOTE: Be sure hardware is oriented as shown in
FIGURE 5.
STEP 6
6. Install backrest (12) by sliding into sleeve on top of
seat assembly (19) and orienting as shown behind
left (8) and right (9) seat supports, and securing in
place using four 1/4-20 x 2-1/4 IN bolts (35) and
locknuts (41). SEE FIGURE 6.
Instruction Manual : PLATFORM 2-MAN LADDER STAND
FIGURE 5
9
FIGURE 6
19
8
41
40
38
FIGURE 5A
12
8
41
35
40
37
17