Kalorik JK 44499 SS Manual page 7

OPERATING INSTRUCTIONS
Always remove the kettle from the power base (6) before filling it or
•
before any operation.
Open the lid (3) and fill the tank with fresh water, paying attention
•
not to fill under the minimum mark or above the maximum mark
indicated on the water gauge of the kettle (7 & 8).
Note: Never fill kettle with any liquid other than water.
Note: Do not underfill the kettle. When water volume is lower than MIN
0.5L, it will boil dry before temperature reach the setting temperature. In
this case, the unit will automatically turn off. To reset the boil-dry
protection please remove the kettle from the power base and wait till it
has cooled down before refilling.
Close the lid and make sure it fits correctly.
•
Put the kettle onto the power base (6) and plug into the wall.
•
To boil water: simply press on the on/off button (5). The kettle will
•
start boiling, turning the blue indicator light on. When water is
boiled, the kettle will turn off automatically and the blue indicator
light will turn off.
Note: Do not open the lid while the water is heating or boiling.
• The real-time temperature gauge on top of lid will show the
temperature when boiling.
www.KALORIK.com
7
JK 44499 - 180330