Ford KUGA 2020 Owner's Manual page 8

Adaptive Cruise Control
• The vehicle speed drops below
20 km/h (12.4 mph).
• You press the clutch pedal for an
extended period.
Note: If the engine speed or vehicle speed
drops too low, an audible warning sounds
and a message appears in the information
display. Automatic braking releases.
The system may deactivate or prevent
activating when requested if:
• A sensor is blocked.
• The brake temperature is too high.
• There is a failure in the system or a
related system.
SWITCHING ADAPTIVE
CRUISE CONTROL ON AND OFF
- VEHICLES WITH: ADAPTIVE
CRUISE CONTROL WITH STOP
AND GO
The cruise controls are on the steering
wheel. See Cruise Control (page 69).
Switching Adaptive Cruise Control
On
Press the button to set the
system in standby mode.
E144529
The indicator, current gap setting and set
speed appear in the information display.
Switching Adaptive Cruise Control
Off
Press the button when the
system is in standby mode, or
E144529
switch the ignition off.
Note: You erase the set speed when you
switch the system off.
Kuga (CTD) Vehicles Built From: 28-09-2020, CG3851en enGBR, Edition date: 202008, First-Printing
(If Equipped)
Automatic Cancellation or
Deactivation
The system may cancel if:
• The tires lose traction.
• You apply the parking brake.
The system may cancel and set the parking
brake if:
• You unbuckle the seatbelt and open
the driver door after you stop your
vehicle.
• Your vehicle is at a stop continuously
for more than three minutes.
The system may deactivate or prevent
activating when requested if:
• The vehicle has a blocked sensor.
• The brake temperature is too high.
• There is a failure in the system or a
related system.
SETTING THE ADAPTIVE
CRUISE CONTROL SPEED -
VEHICLES WITH: ADAPTIVE
CRUISE CONTROL
Drive to the speed you prefer.
Press the toggle button upward
or downward to set the current
speed.
Take your foot off the accelerator pedal.
The indicator, current gap setting and set
speed appear in the information display.
260