Table of Contents
Advertisement
SWITCH #
100,000
3.0) AUDIO CHASSIS PLACEMENT
The Nova III may be placed near your turntable if space allows, on a separate shelf
in your audio rack, or on top of another source or line-level component. Please
make sure that ventilation to the unit is not restricted, and that the unit is away
from magnetic fields or noise from other components' motors, transformers or
displays.
4.0) POWER SUPPLY
The Nova III connects to a wall outlet or power strip with the supplied wall-mount
transformer.
The Nova III will NOT operate without the wall-mount transformer plugged into an
outlet.
5.0) AUDIO INPUTS AND OUTPUTS
Please make sure that the volume control on your receiver, integrated amp, or pre-
amp is turned completely down before plugging in the audio connections. Connect
the phono cables of your turntable to the inputs of the Nova III, noting proper left
and right connections. Attach the turntable's ground lead to the ground lug on the
rear panel of the Nova III.
Using a high-quality interconnect cable, connect the outputs of your Nova III unit to
a line-level input of your receiver, integrated amplifier, or pre-amp, again noting
proper left and right channels. DO NOT PLUG THE NOVA III's OUTPUT INTO
ANOTHER COMPONENT'S "PHONO" INPUT. Some line-level pre-amps have an input
labeled "phono" for convenience but which does not contain phono circuitry. Please
check your pre-amp's owner's manual if you have concerns.
1
2
243
X
OFF OFF
280
X
OFF OFF OFF
380
X
OFF OFF OFF
475
X
OFF OFF OFF
660
X
OFF OFF OFF OFF
1,000
X
OFF OFF OFF OFF
2,000
X
OFF OFF OFF OFF OFF
47,000
X
OFF OFF OFF OFF OFF OFF
X
OFF OFF OFF OFF OFF OFF OFF
! 6
3
4
5
6
ON
OFF OFF OFF OFF
ON
ON
ON
OFF
ON
OFF OFF OFF
ON
ON
7
8
ON
OFF
ON
ON
ON
ON
OFF OFF
ON
OFF
ON
Advertisement
Table of Contents
