Installation Instructions - IKEA Rodulf Manual

Advice and instructions for RODULF.
Sound Level:
< 50 dB(A)
Height setting interval:
68–115 cm or 26.8–45.3 inches
Maximum load:
80 kg or 176 lb
Temperature interval at usage:
50–104 °F or 10–40 °C.
Temperature interval at storage:
0–158 °F or -18–70 °C
Humidity:
20–90 % at 104 °F or 40 °C
Electrical rating:
100–240 V AC, 50–60 Hz, 3.2–1.5 A
Model:
RODULF-GF-470
This desk shall only be used together
with the controller included.
It is the responsibility of every person
who installs, uses, repairs or services
this desk to carefully read these
instructions. Keep these instructions
close to your sit/stand desk.

Installation instructions

• The desk is assembled according to
separate assembly instructions.
• Connect the cable from one leg to the
other.
• Connect the electrical cable to a wall
socket.
NOTE! The electrical cable must have
full mobility.
• The desk is now ready for use.
• The motors stop automatically when
the desk reaches its lowest or highest
position.
Use of the desk
• The desk shall only be used as a
work desk that can be continuously
adjusted between sitting and standing
position. The desk shall only be used
indoors and in a dry premises (office
environment or similar).
The desk must not be overloaded –
the maximum load is 80 kg/176 lb.
The system may be run continuously
for maximum 1 minute. The motors
must rest for approximately 9
minutes it can be used again.
5