Table of Contents
Advertisement
STEP 2 - TuneStage Transmitter Setup
1.
Power on your iPod. Then, plug the TuneStage
Transmitter into the remote/headphone connector.
Press PLAY on the iPod. The TuneStage Transmitter
will power on automatically. The Transmitter's
blue Status LED should be blinking rapidly.
2.
The TuneStage Transmitter and Receiver will
pair with each other automatically. When the
connection has been made, the blue light on the
TuneStage Receiver will stop flashing and stay on
solid. The light on the Transmitter will now flash
slowly.
�
3.
Play a tune from the iPod. Set the volume of the
������������������
iPod to a medium level, and adjust the volume of
your stereo system's speakers as desired.
4.
Enjoy!
����
P74814ea_F8Z901uk_mnl.indd 9
����������������������
������
iPod
or
iPod mini
Do not move the Transmitter back and
forth to avoid damage to the receptacle
Installation
����
EN
|
04
8/7/05 11:29:00 am
Advertisement
Table of Contents
