Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for EVE HS-BG62-60
Summary of Contents for EVE HS-BG62-60
- Page 1 Instruction Manual Cooker Hood HS-BG62-60...
- Page 2 Content 1…………………………………..………………………………Safety instructions 2…………………………………..………………………………Installation 3…………………………………..………………………………Start using your cooker hood 4…………………………………..………………………………Troubleshooting 5…………………………………..………………………………Maintenance and cleaning 6…………………………………..………………………………Environment protection...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS his manual explains the proper installation and use of your cooker hood, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference. monoxide poisoning. - Page 4 ● arning: Before obtaining access to terminals, all supply circuits must be disconnected. Always to do: Always to do: ● lways put lids on pots and pans ● aution: The appliance and its when cooking on a gas cooker. accessible parts can become hot ●...
- Page 5 INSTALLATION (VENT OUTSIDE) MOUNTING OF THE V-FLAP If the cooker hood does not have an assembled V-flap 1, you should mount the half- parts to its body. The images only show an example of how to mount the V-flap, because the outlet may vary according to different models and configurations. To mount the V-flap 1 you should: •...
- Page 6 3. To install onto the wall, drill 4 holes of Ø 8mm on a suitable place according with the centre distance of hole in the back of the cooker hood.See Pic below. 4. Insert the nut into the holes. 5. Insert the screws into the nuts and tight. 6.
- Page 7 Note: the expansion pipe is not supplied. DUCTED OPTION 1. Remove the filter. 2. Optional - replace the 80mm front rail with the 40mm front rail (inc in box) 3. Make sure that internal switches are in ducted position. (see above) 4.
-
Page 8: Start Using Your Cooker Hood
that you do not damage the wiring during installation. 6. Re-install filter. 7. Plug in the power to the unit, turn on and test. ：When the rangehood is re-circulating, carbon filters should be installed. This Notice unit needs to be pre-installed with a carbon filter. ➢... -
Page 9: Maintenance And Cleaning
House fuses blown Reset/Replace fuses. Light does not Refit mains power cable to work, motor does Mains power cable is loose or power outlet. not work disconnected Switch power outlet on. One way valve and the outlet Take down the one way valve are not tightly sealed and seal with sealant. - Page 10 CONTROL PANEL SURFACE The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean and well wrung before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning. Important Using neutral detergents and avoid using harsh cleaning chemicals, strong household detergents or products containing abrasives,as this will affect the appearance of the appliance and potentially remove any printing of artwork on the control panel and will void manufactures warrantee.
- Page 11 NOTE: • Make sure the filter is securely locked. Otherwise, it would loosen and cause danger. • When activated carbon filter attached, the suction power will be lowered. BULB REPLACEMENT The bulb must be replaced by the manufacturer, its Important : service agent or similarly qualified persons.
-
Page 12: Environment Protection
ENVIRONMENTAL PROTECTION This product is marked with the symbol on the selective sorting of waste electronic equipment. This means that this product must not be disposed of with household waste but must be supported by a system of selective collection in accordance with Directive 2012/19/EU.
Need help?
Do you have a question about the HS-BG62-60 and is the answer not in the manual?
Questions and answers