Advertisement
X-Fly Rigging
Truss & Long Strop/Spanset
Fig. (4.1)
Truss
Truss & Strop/Spanset
To secure your X-FLY from Truss using a long strop/spanset we recommend that you choke the strop/
spanset, as displayed above. You will need a carabiner, a swivel and an additional carabiner to then
connect to the eye bolt of the X-FLY. The longer the strop/spanset, the lower your X-FLY will hang and the
more movement you will have. Always aim for 300mm-500mm clearance from the floor to the bottom of
the X-FLY.
Fig. (4.3)
A-Frame
A-Frame & Strop
Using a short strop/spanset (maximum length
of 0.5m) choke over the X-POLE A-FRAME
top bar, you will need a carabiner, a swivel and
an additional carabiner to then connect to the
eye bolt of the X-FLY.
Fig. (4.5)
A-Frame top bar
Aerial Studio
Mount
Strop/Spanset
Compatible
with 40mm &
45mm Tube /
Truss
Carabiner
X-Fly
Copyright© Vertical Leisure Ltd. 2018
LEADERS IN POLE & AERIAL FITNESS
Long Strop/Spanset
Carabiner
Swivel
Carabiner
X-Fly
Strop/Spanset
Carabiner
Swivel
Carabiner
X-Fly
Fig. (4.6)
Single Joist
Aerial Studio
Mount
*
Ceiling
Strop/Spanset
Carabiner
X-Fly
Truss & Short Strop/Spanset
Fig. (4.2)
Truss
Fig. (4.4)
A-Frame
A-Frame & Figure 8
Using the X-POLE Figure 8 connector on
X-POLE A-FRAME top bar, you will need a
carabiner, a swivel and an additional carabiner
to then connect to the eye bolt of the X-FLY.
A-Frame/Ceiling & Aerial Studio Mount
Using the X-POLE Studio Aerial Mount on
either an A-FRAME or from a suitable
mounting point on your ceiling*, choke the
short strop/spanset through the rigging eye
of the mount, then connect a carabiner to the
strop/spanset and finally connect the rigging
eye of the X-FLY to the carabiner.
*Installation on to a ceiling should be a carried out by a
professional installer
Version 1.0
Short Strop/Spanset
Carabiner
Swivel
Carabiner
X-Fly
Figure 8 Connector
Carabiner
Swivel
Carabiner
X-Fly
All rights reserved.
7
Advertisement
